DRILL AND HAMMER
HILTI TE7-C SDS PLUS HAMMER DRILL
|
|
4 Hour: $19.00
Daily: $21.00
Weekly: $63.00
Additional Information
- Tough on concrete, easy on you. Rugged, compact and convenient, the Hilti TE 7 is engineered with a powerful and efficient motor and an innovative hammering mechanism for superior drilling performance. Whether you are drilling 3/16 in. or 9/16 in. openings, the TE 7 Rotary Hammer Drill is the best tool in its class. Weighing in at less than 7 pounds, the TE 7 keeps you drilling non-stop with minimal effort and maximum comfort. With an impressive power-to-weight ratio and the lowest vibration in its class, it's easy to see why the TE 7 Rotary Hammer Drill is quickly becoming the professionals' tool of choice.
- Optimal performance to weight ratio makes the TE 7 ideal for repetitive anchor hole drilling in all directions in concrete and masonry
- Hammering mechanism specially designed for superior drilling performance up to 5/8 in.
- Perfectly matched with Hilti TE-CX drill bits to provide accurate anchor holes
- High efficiency motor
- Overall drilling range 3/16 in. to 1 in. optimal drilling range 1/4 in. to 5/8 in.
- SPECIFICATIONS
- Amperage (amps) 5.47 A
- Assembled Depth (in.) 12.6 in Assembled Height (in.) 8.5 in
- Assembled Width (in.) 3.25 in Blow energy (ft.-lb.) 1.33
- Blows per Minute 4990 CSA Listed Yes
- Chuck Size 1/2 In.
- Chuck Type SDS-Plus Clamshell/Jam pot Jam pot
- Clutch Setting 0 Color Family Red
- Cord Length (ft.) 9 Corded Tool Type Hammer Drill
- Forward/reverse switch Forward switch and reverse switch
- Impact Energy (ft.-lbs) 1.33
- Maximum Speed (rpm) 1050 Maximum hole diameter (in.) 1.125
- Power Tool Product Type Corded Power Type Electric
- Product Depth (in.) 3.25 Product Height (in.) 8.5 in
- Product Length (in.) 12.6 Product Weight (lb.) 6.4
- Product Width (in.) 3.25 in Returnable 90-Day
- Side Handle Yes Side Handle Included Yes
- Sound Rating (Decibels) 93 dB Start Type Electric
- Tool weight (lb.) 6.4 UL Listed 1-UL Listed
- Variable Speed Yes Vibration Control No
- Voltage (volts) 120 V
Also check the following item(s) related to the above:
- SDS PLUS MOIL POINT CHISEL 10"
- SDS PLUS 3/4"X10" CHISEL
- SDS PLUS 3/16"X6" MASONARY BIT
- SDS PLUS 1/4"X8" MASONARY BIT
- SDS PLUS 3/8"X10" MASONARY BIT
- SDS PLUS 1/2"X10" MASONARY BIT
- SDS PLUS 1/2"X16" MASONARY BIT
- SDS PLUS 5/8X8" MASONARY BIT
- SDS PLUS 4" WIDE SCRAPER
- SDS PLUS 3/4X16" MASONARY BIT
- SDS PLUS 1 1/2"X10" FLAT CHISEL
* Prices are subject to change.
* Please call us if you have questions about our hilti te7 c sds plus hammer drill rentals in North Wilkesboro or Statesville NC.