DRILL AND HAMMER
HILTI TE70-ATC SDS-MAX HAMMER DRILL
|
|
4 Hour: $29.00
Daily: $42.00
Weekly: $126.00
Additional Information
- Hilti TE76-ATC
- Great for drilling into concrete. Also works well for light chipping and demolition jobs.
- Technical Features ATC (Active Torque Control) operates in addition to the mechanical slip clutch: Sensors detect jamming of the drill bit, the control unit will disengage the magnetic clutch immediately and shut off the motor
- DRILL IN CONCRETE - HAMMER DRILL BITS 1/2 TO 1 3/4"
- DRILL WITH PERCUSSION CORE BITS 1 3/4 TO 6"
- BITS AVAILABLE FOR RENTAL ARE 1/2"-1 1/2" MASONARY BITS
- DRY CORE BITS 2" AND 3" AVAILABLE
- CHISEL BITS 1"-2"-3" FLAT OR MOIL POINT
- Ground Rod Driver 5/8" or 3/4"
- Voltage 110 V
- Power input 1300 W
- Bit Selection TE-Y / TE-YX (SDS Max)
- Hammering Speed Under Load 100% 2770 blows/minute
- Hammering Speed Under Load 50% 1965 blows/minute
- Weight 17.5 lbs
- Length 20"
- Width 4.5"
- Height 11 3/8"
- Drilling Modes Rotary hammer and chiseling
- Single impact energy 100% joules 8.35 J
- Single impact energy 50% joules 4.35 J
- Reversing Switch No
- Service Indicator Light Yes
- Variable Speed Switch Yes
- Double Insulated Yes
- Depth Gauge No
Also check the following item(s) related to the above:
- SDS MAX 1"X21" MASONARY BIT
- SDS MAX 1 1/4"X23"MASONARY BIT
- SDS MAX 1 1/2"X23" MASONARY BIT
- SDS MAX 3/4"X13" MASONARY BIT
- SDS MAX 7/8"X21" MASONARY BIT
- SDS MAX 1"X13" MASONARY BIT
- SDS MAX 12" MOIL POINT
- SDS MAX FLAT CHISEL 1X12"
- SDS MAX FLAT CHISEL 3X12"
- SDS-max 5/8"X8" MASONARY BIT
* Prices are subject to change.
* Please call us if you have questions about our hilti te70 atc sds max hammer drill rentals in North Wilkesboro or Statesville NC.